Lanes, turns and passing test practice

California knowledge testFree, no account

10free questions
7handbook sections

What you need to know

Good lane habits start before you move. Check your mirrors, signal, look over your shoulder to cover the blind spot, and only then change lanes. Signal early enough that others can react: about 100 feet before a turn is the usual guide, and further ahead on fast roads.

For turns, a right turn starts and ends in the lane closest to the right edge, and a left turn starts from the lane nearest the center line and ends in the matching lane on the new road. Do not swing wide or cut the corner. When you merge onto a highway, use the acceleration lane to reach the speed of traffic and join the flow at a gap.

Pass only when it is legal and clearly safe. Never pass on a hill, a curve, at an intersection, at a railroad crossing, or where a solid line is on your side. Check that there is room to return to your lane, and move back only when you can see the vehicle you passed in your rear-view mirror. Passing on the right is allowed only in limited cases, such as on a road with several lanes in your direction or when the car ahead is turning left, and never by driving off the pavement.

California Driver's Handbook: Turning · Signaling · Passing · Hand signals · Lane changes · Merging · Highways

10 practice questions

Pick an answer to see whether it is right and why.

1 of 10✓ 0

How early should you normally signal before making a turn?

Mark one answer

All the questions with answers
  1. 1. How early should you normally signal before making a turn?

    Answer: At least 100 feet before the turn

    Signaling at least 100 feet ahead gives others time to react. On fast roads, signal earlier still.

    California Driver's Handbook: Turning · Signaling

  2. 2. When making a right turn, you should:

    Answer: Stay close to the right edge, and end in the right-hand lane

    Begin the turn from the right-hand lane and finish in the right-hand lane of the new road. Swinging wide invites other vehicles to squeeze in beside you.

    California Driver's Handbook: Turning

  3. 3. On a two-way road, you turn left onto another two-way road. You should finish the turn:

    Answer: In the lane closest to the center line

    A left turn ends in the left lane of the new road, the one next to the center line. Cutting into the oncoming lane is both illegal and dangerous.

    California Driver's Handbook: Turning

  4. 4. Where is passing NOT allowed?

    Answer: On a hill or curve where you cannot see ahead

    Never pass where you cannot see far enough to be sure the way is clear: hills, curves, intersections and railroad crossings. A head-on crash is the risk.

    California Driver's Handbook: Passing

  5. 5. After passing a vehicle, you may return to your lane when:

    Answer: You can see the passed vehicle in your rear-view mirror

    Seeing the whole vehicle in your rear-view mirror shows you have enough room to move back without cutting it off. Signal before you do.

    California Driver's Handbook: Passing

  6. 6. Your brake lights are not working. To signal that you are slowing or stopping, you should use your:

    Answer: Left arm bent downward

    Left arm bent down means slow or stop. Left arm straight out means left turn, and left arm bent up means right turn.

    California Driver's Handbook: Hand signals

  7. 7. Before changing lanes, you should:

    Answer: Check your mirrors, signal, and look over your shoulder

    Mirrors do not show everything. A quick glance over your shoulder covers the blind spot before you move.

    California Driver's Handbook: Lane changes

  8. 8. When merging onto a highway from an acceleration lane, you should:

    Answer: Speed up to match traffic speed and find a gap

    The acceleration lane is there so you can reach highway speed before you merge. Driving too slowly or stopping creates a hazard.

    California Driver's Handbook: Merging · Highways

  9. 9. You can pass on the right only when:

    Answer: The road has more than one lane in your direction, or the driver ahead is turning left

    Passing on the right is allowed in limited cases and only on the pavement. Driving off the road to pass is not allowed.

    California Driver's Handbook: Passing

  10. 10. You make a hand signal with your left arm bent upward. You are about to:

    Answer: Turn right

    Left arm bent upward means a right turn. Left arm straight out means left, and bent downward means slow or stop.

    California Driver's Handbook: Hand signals

Questions people ask
How far ahead must I signal a turn?
A common rule is at least 100 feet before the turn, and many manuals tell you to signal earlier on faster roads. Always signal before you slow down or change lanes.
What are the hand signals if my lights fail?
Use your left arm. Straight out means a left turn, bent upward means a right turn, and bent downward means stop or slow down.
Is it ever legal to pass on the right?
Yes, in limited cases: on a road with two or more lanes going your way, or when the driver ahead is turning left and there is room. You may not drive off the road or on the shoulder to do it.
46Sit a full 46-question mock testEvery topic, 35 minutes, marked like the real test.

Other topics

Rules summarized from the California Driver's Handbook. Questions written by PassRank. These are not the official California DMV knowledge test questions.