How to drive an automatic car: P R N D

Short answer: In an automatic you mostly use three positions: Drive (D) to go forward, Reverse (R) to back up and Park (P) when the car is parked, with Neutral (N) between. Start the engine in Park with your foot on the brake, press the brake to shift out of Park, use your right foot for both pedals, and when you stop for good put the car in Park and set the parking brake.

P R N DPark, Reverse, Neutral, Drive
1foot for both pedals
Braketo leave Park

Find the controls

Where things are varies by car: check your owner's manual for the other positions.

  • Steering wheel

    In front of the driver's seat.

  • Gear selector

    Between the front seats in most cars. Some cars use a lever on the steering column or a dial instead.

  • Gear display

    On the dashboard, shows P R N D and the position you are in.

P R N D

Park, Reverse, Neutral, Drive.

  • Drive

    To go forward.

  • Reverse

    To back up.

  • Park

    When the car is parked.

  • Neutral

    Between Reverse and Drive. In everyday driving you simply use Drive, Reverse and Park.

Start, shift, stop and park

In order. The start-up and pull-away steps follow ICBC's checklist.

  • 1. Starting up

    Parking brake set, right foot on the brake, the transmission in Park, then start the engine.

  • 2. Leaving Park

    Press the brake pedal first, then shift. Automatics sold in the US since September 2010 must have a brake-shift interlock: the service brake has to be pressed before the transmission can leave Park.

  • 3. Pulling away

    Right foot on the brake, put the gear into Drive, release the parking brake.

  • 4. Pedals

    One foot works both pedals: the right. Keep the heel of your right foot on the floor to pivot between brake and accelerator, and your left foot firmly on the floor (or the dead pedal) to brace yourself if you need to brake hard.

  • 5. Parking up

    Keep your foot on the brake, put the transmission into Park, then apply the parking brake.

  • The brake-shift interlock rule is a US federal standard. ICBC's guide is a Canadian (British Columbia) source for the same everyday routine.
  • General learning material, not an official test. Your owner's manual is the authority for your car's selector and its other positions.

Practise it in the app

PassRank is on the App Store and Google Play. Same account on the website.

3DPractise parking in 3DParallel and reverse parking, scored as you go. Right-hand traffic, on your phone.

Questions

What do P, R, N and D mean on an automatic car?
Park, Reverse, Neutral and Drive. Most of the time you simply put the car in Drive to go forward, Reverse to back up, or Park when it is parked.
Do I have to press the brake to shift out of Park?
Yes. Automatics sold in the US since September 2010 must have a brake-shift interlock, so the service brake has to be pressed before the transmission can leave Park.
Which foot do I use in an automatic car?
Your right foot, for both the brake and the accelerator. Keep your left foot on the floor, or on the dead pedal, to brace yourself if you need to brake hard.
What do I do when I stop for good?
Keep your foot on the brake, shift to Park, then set the parking brake.

Sources

  • ICBC (British Columbia), Tuning up for drivers: getting you ready for your road test, 2026, read 9 Nov 2026
  • NHTSA, Federal Motor Vehicle Safety Standard 114 (49 CFR 571.114), brake-shift interlock, read 9 Nov 2026

Checked:

More: Road test pre-drive checklist · Road test sites in the United States · Road tests in Canada