Road test pre-drive checklist
Short answer: Before a California road test the examiner goes through the DMV's Pre-Drive Checklist: both side brake lights and the turn signals front and back must work, the horn must be the car's own and loud enough to hear from 200 feet, you must set and release the parking brake, everyone must wear a working seatbelt, and you show three arm signals. A parking brake that does not set means the test is rescheduled.
Find the controls before the day
The examiner asks you to point at or use these. Where they sit varies by car.
Door mirror
Outside the driver's window.
Interior mirror
Top middle of the windscreen.
Hazard lights
Usually a red triangle button on the dashboard.
Dashboard controls
The wipers, lights and defroster are around here.
Steering wheel
The horn is in the middle.
What the California DMV checks
From the DMV's Pre-Drive Checklist (Safety Criteria).
Brake lights
Both brake lights, one on the right side and one on the left side of the car, must work. The centre light, usually on the rear window, does not count.
Turn signals
Both the right and the left turn signals, on the front and the back of the car, must work.
Horn
It must be designed for the car and in proper working condition, loud enough to hear from at least 200 feet. It cannot be a bicycle horn.
Parking brake
You must be able to locate it and show how to use it: set and release. A parking brake that does not set means the test is rescheduled.
Seatbelts
All seatbelts must work properly and be used by the people in the car: you and the examiner.
Arm signals
You show three: left turn, right turn, and slowing or stopping.
The three arm signals
Arm signals are for when signal lights fail or cannot be seen. ICBC asks learners to practise them too.
Left turn
Left arm straight out of the window.
Right turn
Left arm bent up.
Slowing or stopping
Left arm down.
Other places
This is California's list. Yours may differ: read your own manual.
Pennsylvania
PennDOT's Driver's Manual names a controls check at the road test: horn, lights, wipers, parking brake, four-way flashers and defroster.
British Columbia
ICBC checks the pre-drive controls and seat. A horn that does not work is among the reasons a road test can be cancelled; ICBC also asks learners to practise arm signals.
- The checklist is form DL 955, revision 10/2017. Check the DMV's current criteria before your test.
- Practice material, not an official test. The examiner's instructions on the day are what count.
Practise it in the app
PassRank is on the App Store and Google Play. Same account on the website.
Questions
- What does the California DMV check before a road test?
- The car's brake lights, turn signals, horn, parking brake and seatbelts, and that you can show three arm signals. The DMV calls this the Pre-Drive Checklist.
- Does the centre brake light count on a California road test?
- No. Both brake lights, one on each side of the car, must work. The centre light, usually on the rear window, does not count.
- How loud does the horn have to be?
- Loud enough to hear from a distance of at least 200 feet. It has to be the car's own horn, in proper working condition, not a bicycle horn.
- What arm signals do I have to show?
- Left turn (left arm straight out), right turn (left arm bent up), and slowing or stopping (left arm down).
- What if the parking brake does not set?
- The California DMV's checklist says the test is rescheduled, so test it before the day.
Sources
- California DMV, Driving Test Criteria, form DL 955 (rev. 10/2017), Pre-Drive Checklist (Safety Criteria), read 9 Nov 2026
- ICBC, Vehicle checklist and Tuning up for drivers (2026), read 9 Nov 2026
- PennDOT, Driver's Manual, Testing section, checked 28 Oct 2026
Checked:
More: How to drive an automatic car · Pennsylvania road test sites · New York road test parking · British Columbia road tests